ꁲ
Laser Notching Machine
Is mainly used for cutting and forming the tabs of lithium battery pole pieces and strip the tabs, and is applied to the pre-process of multi-tab winding or lamination.
-
Laser cleaning machine
Realize automatic cutting and forming of the tabs, and automatic electrode slitting function, automatic detection and closed-loop control of slitting width.¥ 0.00Buy Now
-
Laser Tab Forming Machine
The laser cuts the roller pressed electrode into boss-shaped tabs, and then uses a slitting cutter to divide the electrode into two.¥ 0.00Buy Now
Is mainly used for winding power/energy storage batteries, compatible with multi-tab winding and all-tab winding.
-
Large Prismatic Automatic Winding Machine
After unwinding the coil electrode material with cut tabs, the cathode electrode and anode electrode are wound into prismatic cell with the separator through winding machine.¥ 0.00Buy Now
-
Cylindrical Automatic Winding Machine
The coil electrode material with cut tabs, and the anode and cathode electrode and the separator are wound into a circular cell through a winding machine.¥ 0.00Buy Now
-
Prismatic Laser Notching and Winding AIO Machine
The coil electrode material completes the laser tab forming in the equipment, and then combines the cathode and anode electrode and the separator into a prismatic cell by winding.¥ 0.00Buy Now
Lamination Stacking Machine
Is mainly used for power/energy storage batteries. The incoming material of the composite laminating machine is the coil material of the cut tab, and the positive and negative electrodes are cut, hot compounded, laminated, hot pressed and coated around before blanking.
Formation & Grading
Activate battery charging, test battery capacity or other performance.
-
OCV
Mainly used to test battery voltage, internal resistance, ambient temperature, etc. It has a special reset block and master installation station, which can realize one-key reset and calibration.¥ 0.00Buy Now
-
Grading Equipment
It is mainly used for data collection, storage and uploading in the process of grading the capacity of prismatic aluminum shell cells, so as to realize the traceability of cell capacity data.¥ 0.00Buy Now
-
Negative Pressure Formation Equipment
Mainly used in the negative pressure formation process of prismatic aluminum shell cells, collecting and uploading the voltage, current and other data of the cells during the charging process, so as to realize the traceability of the cell formation data.¥ 0.00Buy Now
Product
Service Center
About Geesun
Join Us
social media
Service
Tiktok
Video